Lynch NW - Spyderco Standard Wire Clip Replacement

Compatibility (CL-WRE-STD)

Spyderco

WILL FIT

Autonomy 1
Caly 3
Caly 3.5
Chicago
Dragonfly 2
Foundry
Ikuchi
Lil Native Compression Lock (will not fit Lockback version)
Manix 2 Lightweight
MicroJimbo
Paramilitary 2 Lightweight
Para 3 Lightweight
Para 3 LW
Poliwog
Roadie XL
Sage 5 Lightweight
Sage 5 LW
Sage 5 Maxamet
Sage 6
Siren
Slysz Bowie (newer versions - will not fit the Gen 1 version)
Slysz Bowie (KnifeJoy Exclusive)
SpydieChef (newest ‘black screw’ version - will not fit older ‘silver screw’ models)
Squeak
Techno 1
Techno 2 (fits newer version with centered clip screw)
UKPK
Urban
Urban Lightweight

WILL FIT the following models which use a connected screw/barrel setup to hold the clip on the knife. On these models, if the screw and barrel both have drives, you need only to loosen the screw, then tighten it down from the opposite side once the clip is installed. If the screw has a drive, but the barrel side is plain (no drive), the screw and barrel need to be removed (before installation of the new clip), then re-installed with the screw head on the opposite side of the knife. The design of these knives puts the screw too high in relation to the ‘tine channels’ to get a driver through the access hole on the clip and onto the screw when the clip is place. But by flipping the barrel/screw around, it works well, as the clip can be tightened from the opposite side.